What adapter designs are there?
With this suspension equipment it is allowed to simplify the application of the motor block. After all, it acts as a transitional link linking the unit personally with other multifunctional elements: attachments for the sake of planting and hummocking of potatoes, plane plows, plow ... Setting the situation it is allowed to automate the garden and horticultural works very much. For example, the use of special equipment with attachments is permitted to increase the working speed from 5 in front of 10 km/h. There are quite a few types of adapters. In general, the structure is a cart attached to the rear of the motor block, equipped with a comfortable seat
Some models are equipped with a lever for the sake of lifting, thanks to which the mechanism and the course of the unit itself are much simpler, according to the site. Other adapters, except for agricultural work, can also be removed for the transport of goods. They are equipped with a special body. Depending on the multifunctional value, adapters can own a short or long drawbar. Models with small drawers are designed to work with light motor blocks, and with long ones - with heavier units.
There are also on sale models with telescopic drawbar, also those in which it is allowed to adjust the track width.
Adapters to the motor block are fixed using a single enlarged coupling, which consists of 2 parts: the first part is needed for the connection of equipment to the unit. And the second acts as an adjustable adapter between the equipment itself and its lifting mechanism. For the sake of increasing the number of tools used, the adapters are equipped with a double universal coupler.
Building a simple design
A typical adapter sample is an iron frame. It is made of a pipe with a rectangular section of 1.7 meters in length. For one of the ends of the pipe perpendicularly welded pipe length of 0.5 meters, which is quite a service basis for the sake of fixing the racks near the wheel of the adapter. Raise the racks themselves through the axle of the wheel and in front of the top point - 0.3 meters. For the production of the construction it is allowed to remove the wheels removed from the garden cart. It is possible to install them for a bushing, which is easy enough for an ordinary lathe. For finished bushings wear bearings of the appropriate size
After that, to the central tube and the adapter wheel bushings, it is necessary to attach braces through welding. The length of the products depends on the angle of their inclination relative to the structure. The square frame of the adapter is also allowed to perform at least the size. In our case, this rim is 0.4 x 0.4 meters. In order to equip the suspension equipment, the channel No. 10, 0.4 meter long, is welded to the rear end of the frame. The assembly and integration of the side pipes of the structure is done with bolts.
The stick is also welded to the frame for the sake of regulation. It has three"knee"lengths of 20, 30 and 50 cm. For the growth of the applied force, the adjusting stick is equipped with an additional arm of 75 cm in length. The trailing link of the structure is allowed to be purchased in the store or made without the help of others. Whether due to the collision of the production standard or without the help of others, special attention should be given to its reliability. Through its properties depends the slowness of operation of the outboard equipment.
The seat is located for the iron support, which is welded to the central pipe. The adapter is drunk to operation.
Refinement of the functional model
For the production of a functional device must prepare:
Iron pipes and corners
Sheet steel;
Two wheels
Comfortable seat
Welding tools and tools.
This adapter is a functional model. It can be extracted for the sake of carrying out the main agricultural work and the transportation of goods in an uneven terrain for close distances. It is possible to equip the structure with such agricultural implements, such as a plow, a harrow, a hoger, a potato digger. In the winter months, the adapter is allowed to add a scraper for snow removal. The main elements of the equipment are: a rim and coupling devices, also a wheel two and seats
The action of producing an adapter in the home is a fair number of steps.
Stop #1 - compiling a kinematic scheme
For the sake of ensuring the equilibrium of the design and preventing additional overloads for the design step, it is necessary to make a kinematic scheme. It can be done without the help of others or extract the finished variation. This plan was developed for the production of an adapter designed to work for the Neva motor block
Stop #2 - the action of the main parts
Making and assembling the frame proudly foresee the refining of the plug with the bushing. It is needed to ensure the free rotation of the trailer. The frame construction is made of iron pipes and corners
The body of the structure is made of iron sheet. The height of its sides is no less than 30 cm. To be able to manufacture racks for the adapter wheels is allowed to use the above scheme
The real artless variation in the production of the coupling unit of the structure is a 15-centimeter pin, who is poked into the hole of the drawbar of the U-shaped motorized"towbar". A disadvantage of this option is the rapid wear: by the action of a freely rotating trailer, the holes for the coupling are vividly broken. For the sake of reducing the wear and tear of the P-shaped tenacious desire to extend.
Video master-class production of rotary knot for motoblock:
Stop #3 - installing the seat
For the spinal frame of the adapter bead, retracting for 80 cm through the front edge, secure the seat. It is fixed with bolts. Adapter is drunk. It remains only to test the ability of the functional device. For the sake of extending the lifespan and increasing the attractiveness of the design, all iron elements must be painted
Video-briefing with an example and useful tips
Комментариев нет:
Отправить комментарий