Perfectly decorated iron arbors for the sake of giving, acting as an aesthetic addition to landscape design, are able to emphasize the style of the owner. The abundance of shapes and sizes of iron garden arbors is striking. The decoration of suburban areas is like a classic round, square, six- and octagonal arbours, unreasonably and unique designs of the most unusual design decisions. Depending on the designer's plans, the arbors can be decorated with a variety of decor elements: artistic forging, hanging flowerpots with ampel colors ...
The main advantage of pavilions for the sake of giving out of metal is their strength and longevity. Comfortable designs are able to properly serve not a single season. The only thing that is required for the extension of their service life is at times to consider and clean the areas for which signs of corrosion have appeared.
The hardness of the frame of iron arbors allows to anticipate the change in geometric dimensions, which often appear due to uneven subsidence of the soil by seasonal action configurations. Depending on the design solutions and multi-purpose gazebo for hidden site can be set any conditions for the rest, beginning with garden furniture and finishing barbecue or stove BBQ
Options for the design of the roof of the iron frame are also an excess: stone, iron corrugated board, polycarbonate ... The choice is limited to a few preferences and material abilities of the owner.
An iron-built iron house - like the minimum pretext for the sake of its pride owner. And so we propose to see the main stages of construction so suitable for the farm construction.
Step-by-step construction of a gazebo with a multi-faceted roof
A hexagonal house is a classic that does not lose its relevance for several 10 years old. Such a comfortable structure has close irrefutable advantages, the main ones between which are: elegance, spaciousness, strength and simplicity of erection. Such an eight- or hexagonal structure is analogous to the round model of a gazebo, but the reward through the latter is much simpler on the basis of construction beliefs.
The book, in order to perform an iron gazebo without the help of others, is nothing complicated. For that, a special tool must be slightly owned and kept by the smallest plumbing skills.
Step #1 - preparing all the necessary materials
For the production of an iron gazebo it will be necessary: > Hollow pipes with a wall width of 2-4 mm for the sake of the racks of construction (rectangular or square section)
Mounting brackets
Rods for the crate
Wall paneling
Whirlpool or garden drill
Electrodes
Metal drills
Construction height;
Dust and cement;
The suitability of metal.
Between the tools we will need: a Bulgarian, a welding tool, a puncher or an electric drill, zinc coated screws and screwdriver.
Speech #2 - choosing a place and preparing the foundation
The essence of the contract for choosing a place for the arrangement of the arbor - so that the hosts and guests feel comfortable and comfortable here, admiring the most beautiful ids for summer cottage.
The verdict of the doorway dimensions:
height is calculated, orienting for the finger human profit (1.8-2.The width of the opening is almost the same as the standard size of the door to the apartment (0.9-1.0 meters).
The area chosen around the gardening is cleared through garbage and tree roots. With cleared through debris and the remains of the plants of the site we remove the grassy discharge of the soil, who is used for the sake of pouring into the flower beds and leveling out the differences for the site
After clearing the area and taking off a 15-20 cm discharge of earth, lower the formed"foundation pit"by falling asleep 5-8 cm with a layer of sand, watered with water and painstakingly compacted. For a base of sand, it is allowed to lay out simple pavers or paving slabs, or to construct a concrete pavement. For the sake of this, we form a timbering from the boards, fixing it in the ground according to the outer side by pegs. We pour the pad with concrete and leave it before full hardening for a number of days. The arrangement of the area, with an area of more than 2 square meters, should predict thermal shrinkage seams. For the sake of this board formwork, set, withstanding the gap of 1 meter, and fill the place with cement. Then we remove the hardening of the concrete board, and fill up the cracks and voids with a watery substance. <
Speech #3 - installation of support pillars
Then the completion of the work in accordance with the arrangement of the floor, in accordance with the perimeter of the site, we establish the marks where we will place the bearing poles. The number of racks should correspond to the number of corners of the gazebo. For the sake of erecting the support posts in the designated places with the help of a colossus or a garden borer, dig out holes with a depth of 80 cm.
The support racks desire to deepen below the earth's freezing level , which is through 80 -100 cm. The bottom of the dug holes is covered with a layer of sandy-gravel consistency. In the center of the holes we set up iron pillars. Using the level, we determine their verticality, and then fill the voids with cement.
Probably another variation of the erection of racks, which in planned locations for a depth below the level of freezing of the ground establish a columnar foundation - concrete columns with mortgages. Iron pillars-pillars will be welded to these mortars. Then the vertical racks to them are allowed to weld horizontal cross-pieces, in the role of which iron pipes or rods can act.
The provinces are arranged in two rows , the width between which is 1.2-1.5 meters. For them, in the upcoming, it is enough to tolerate galloon (boards, boards, polycarbonate).
Iron construction can be typed like with the help of screws and bolts, for no reason and through welding. Election depends a little on whether the owner can do with the welding machine or whether he can invite the experienced welder. The main advantage of the bolted joint is the ability to dismantle the structure for the winter season. However, at the same time, we should not forget that during the use of the design bolted connections will have to be fixed without stopping.
Conjecture #4 - upgrading the hexagonal roof of the structure To flow from the roof the water did not fill the structure, the transverse lags are placed without cause, so that they leave at each end for 50 cm. For the arrangement of a regular eight- or hexagonal roof, we weld the transverse beams to the support posts, placing them well for a distance of two meters by a well-wisher through a friend.
The logs are welded to the iron cross-bars, and then orienting ourselves according to the level, we attach and fix the rafters
The real artless variation of the arrangement of the roof is galloon sheets of polycarbonate. For this, we make holes in iron rafters for the sake of fixing the roofing material. In order to correctly set the main sheet of the roof, we lay two sheets, according to them we count and exhibit an extraordinary angle and take-out. After that, the main sheet is removed, and the second one is fixed for the screw. All the sheets of the roof are screwed in accordance with the queue, for the sake of giving stiffness holding them between themselves through two waves.The house is actually ready. It remains to attach the side panels and paint the iron elements of the frame. It is possible to paint the finished structure through the application of a powder coating. A positive result is given by the usual variation of the coloration, which is first applied to the form of the ground discharge, and then the suit is matched to the metal.
Video examples of the construction of other structures
Sample #1 :
Образец #2:
: 7 original ideas
Комментариев нет:
Отправить комментарий