Peculiarities of pallet introduction
Pallets are wood structures that carry out the occupation of packaging material, the use of which makes it easier to transport various kinds of products. The pallets are in the form of rigid supports assembled from knocked down wooden boards placed for a small distance by a well-wisher through a friend
The average weight of the empty pallet is 15-20 kg. The overall dimensions of the structure, depending on its purpose, may exist:
120x100x12 cm (standard pallet)
120x80x12 cm (europallet).
A tree species used for the production of structures is chosen strong and long-term. This is done in such a way that they can refrain luggage before 1000 kg. And therefore even the already used pallets are able to have a second existence, having served as a multifunctional part of the site is not the only season.
Where to take the pallets?
Woody Although pallets are quite strong structures, all sorts of packaging materials are being considered by many manufacturers and transport companies. The pallets weakened through loads for the transportation of heavy loads can not be re-used,It is allowed to take out the used packaging material using one of the following methods:
Bring used pallets. You can find advertisements of this kind without effort for targeted portals. The value of the products ranges from 30-150 rubles per piece.
Direct contact with manufacturers or transport companies. Most of them are ready to give the used packaging free of charge, if only they do not expel it themselves. It is allowed to assemble the pallet without the help of others. Quite a bit to stock up boards of 15-20 mm in width and wood bars with a cross section of 60-70 mm. Having determined the dimensions of the future design, you should cut the boards for the required dimensions a little, and then fasten the elements according to the standard scheme.
Preparation of the material
Wood pallets are comfortable for them can be extracted in a variety of ways. They are comfortable to break and fasten, tighten with fabric and decorate, connect with other materials and complement rollers.
In order to extract the pallets for the production of blanks, the matter must be prepared. For this, they must first be eaten through dust and dirt. To prolong the construction of wood structures and remove the roughness and burrs, which can give many inconveniences in the process of using furniture, will help grinding the surface.
It is more convenient to perform the job by treating the wood kind with a grinding machine. For the sake of safety, it is better to clean the house in a perfectly open room, wearing a protective mask.
It is allowed to subordinate the entire structure, but a fraction of it, which is quite directly"in contact"with the body. Also, as necessary, the creation of blanks of unusual dimensions, pallets in advance are worth buying. For the sake of simplicity, cleaned boards are best sorted according to their state and width.
And again, when planning to have a future environment for the open air, it is worth taking care of the book, so that it does not have a terrible humidity. For this purpose, the desire to cover a layer of primer, created for external work, which has a moisture repellent effect. Without additional processing by the action of atmospheric phenomena, light wood will acquire gray color, and the lower planks touching the ground and completely rot, without serving and more one or two seasons
Options for the production of furniture from pallets
Pallets, like ready-made elements of the designer, are a good basis for the production of multifunctional items of interior. In the book, in order to perform the situation of pallets, there is nothing complicated. Suffice it to recall, like in childhood you collected lockers and beds from small matchboxes. The same abilities should be applied to work with structures of a very large size.
Garden chairs and benches
For the sake of creating a comfortable and convenient shop, we will need:
2-3 pallet sizes
wood bars with a cross section of 50-60 mm
iron corners
drill with a drill
property of protection (glasses and gloves).
For the sake of giving a more representative look to the finished product, prepare also a varnish or any paint created for works in accordance with the tree.
Therefore, we proceed to work. A standard pallet is assembled from 7 boards. For the production of the seat and the back of the bench, we take a pre-cleaned pallet and saw it for two parts. The construction is sawn in half so that the four bars stay together, doing the seat, and the three become the back of the next bench div>For the sake of the connection of the backrest and seat, also the production of the chair's elbows, it is permissible to remove the boards by disassembling a different pallet, or extract the bars available in the household. Combining the edges of both parts at right angles, we fasten them together with the help of shurs. To increase the reliability and strength of the connection of the backrest to the seat, it is permissible to use the double-fastening method. For the sake of stiffening the construction, according to both sides of the connected parts, we attach 1-2 narrow slats , placing them parallel to each other
The length of the sidewalls depends on the height for which they will occupy. From the remaining boards thicker or wood bars we cut 4 blanks near the upgrading of the legs. Masters advise the legs for the sake of the bench to act broad, but not extremely high, therefore it is permissible to increase the stability of the structure and perform rest for it more comfortable
The legs are attached to the bottom of the pallet on both sides using the iron corners to strengthen the fixation.
After assembling the basic structure, it is necessary to add it to the desire, with certain elements, for example, to cut decorative elements for the back, decorate the side panels with elbows . A ready bench is covered with a dull varnish or a paint of the chosen color - all the time depends on your preferences and overall design of appearance. According to the same principle, it is allowed to operate corner shops, arranging comfortable corners in the garden, or even to design separately standing chairs p>
Manufactured by the hands of the environment of pallets, fairly nepridmenna for the sake of the suburban site. Having acted as a worthy substitute for old worn furniture, it can easily fit in various styles of interior. A comfortable pallet shop made of wood of natural light color is excellent enough to look in the garden for a background of luscious greenery and colorful flowers The construction is cut in half so in such a way that the four bars are left together, doing the seat, and the three are the back of the future bench.
Hinged beds and sofas
Not much harder to make spacious beds and hinged sofas. They will be a successful addition to the interior of the terrace or veranda.
If you plan to design a more comfortable room for recreation, equipped with a comfortable mattress, you will have to tinker longer. Around the division of the mattress it will be necessary to construct a special box, to collect who is allowed from the boards of the first of the remaining unused trays. For the production of the box in pallets, we cut the middle support, and the cut out portion is fixed between the sides, forming the sides
In the end, you should get a structure, the size of which corresponds to the perimeter of the bottom of the bed. The height of the vertical vertical racks depends on the thickness of the mattress. The finished box is set for two pre-assembled intermediate pallets and fixed with screws.
From the wider bars or the remaining boards it is allowed to design the headboard. Intermediate between the edges of the pallet is comfortably removed as boxes for the storage of pastel accessories. The finished structure remains slightly covered with two or three layers of paint, or covered with a dense mottled cloth or imitation leather
If you plan to move the bedroom, changing the"scenery"of a burgeoning garden, equip the structure with wheels. However, please note that for this purpose it is worth taking out massive wheels that can withstand the mass of not only the construction itself, but also the authority of the person reclining for it.
The arrangement of the summer cinema for fresh air is very suitable for high altitude A bed that can accommodate a huge family or an entire company. In order to fulfill the rest for such a bed more comfortable, supplement the design with soft mattresses and large cushions
To protect the underside of mattresses through dust is easier then Only by lining the appearance of pallets with a breathable covering material such as agrofiber. In accordance with the same principle, hinged sofas are also constructed, equipping heavy structures with strong ropes or chains.
Look at the video about the book, like doing a sofa from pallets:
Chests, tables and racks
A successful addition to the chairs and benches will come from the garden woody food made from among those materials.
The assortment, designed in the same style, is able to equip the garden part with a dressed out adornment of suburban appearance.
The tree is mixed with other materials. Therefore, the furnishings from wood pallets can be freely supplemented with textile devices, glass elements, stone ornaments and plant compositions.
For the production of a small table, only 2-3 pallets will be needed. In general, the development of table production from pallets not much than differs through the one used in the development of the above chairs and garden benches
In order to make the design, decorated with a continuous cloth, into the voids between the slats of the first pallet we fill the boards from the second billet. The finished road is well polished, covered with stain and leave the workpiece before it dries completely. In order to get rid of the roughness, carefully rubbed the form with fine-grained sandpaper or re-grinded.
We move to the assembly of the structure. In accordance with the angles of the lower part of the table through the bolted joint we fix 4 legs. For the sake of arranging the shelf near the working cloth of the table, we fasten the shield assembled from the pallets disassembled for the board. In the assembled design, all the unoccupied places are covered with 2 layers of stain. We fasten the rollers to the legs of the table. Curious looking tables, the working view is complemented by built-in containers near the planting of spicy crops.
The stylization of outdoor garden tables depends only through your imagination. The garden table can be zaderated around a huge playing deck or large English banner
The old pallets are free to adapt even around the upgrading of the functional shelves, thanks to which you can place small containers with flowers or the right things around the open sky for the sake of leaving steniyami. Its use in the arrangement of the suburban sector can also find a flap. Folded, the folding shelf occupies a minimum of space, and in the unfolded it acts as a comfortable stand for the sake of locating suitable items in the household . Some craftsmen, developing the idea of creating multifunctional furniture from old pallets, went further.
Unique buffets, beautiful chests of drawers and capacious lockers - far from complete list of those pieces of furniture that can be made from wood packaging
It is possible to collect even real"", Who is happy dressed up decoration terrace or in the garden playground. The two-storey house is assembled from vertically installed pallets. The use of a snow-white color in the design makes the design visually light and weightless, and the greenish strokes allow it to harmoniously fit it into the surrounding view.
The outlook that the pallet environment is allowed to do just to itself is wrong. Some craftsmen put bait products for sale, turning a favorite hobby into a prey. A popular example of this can be served by popular dog food troughs. Comfortable feeders for stable legs have a representative exterior, so they can perfectly fit into the interior of the house and the surrounding landscape design.
The reason for the popularity of furniture from wood pallets, made by own hands, is freely explained by its originality of design. It is affordable, but at the same time more convenient. In addition, people who create or are getting ready furnishings from the pallets are driven by the security argument. After all, pallets are made from wood that has not been processed by any chemical means. And therefore, these products collected from pallet according to the law can be classified among the most environmentally friendly pieces of furniture for the light.
And the sentence offers pretty thoughts for inspiration. Do not be afraid to experiment, making your existence brighter. Pleasant creativity!
Video-selection: garden furnishings from pallets
Комментариев нет:
Отправить комментарий