How to make a cap for a well: an overview of 3 design options

How to make a cap for a well: an overview of 3 design optionsA well for a dacha is both a key of cold, clean water, and an imaginary element. If in accordance with the design style, the well is a single whole with other buildings, some look more presentable. It is not in vain that a large number of summer residents have in their area purely ornamental wells - wood, crowned with carvings, with improvised flower beds for a lid, etc. The end for the well itself can be made of different materials - wood, metal, plywood, plastic. In order to be useless, insects, small animals do not get into the well, the end must exist tightly fixed, strong, secure the air flow and, of course, exist fine.
Wood is a more successful material for the production of wells: it looks great, is environmentally pure material, has good operational features. The wood finish, if you take out decorative elements, looks and more aesthetically. In this case, the well is trimmed with a narrow beam, the bench is made of it and the end is made - a beautiful and comfortable structure emerged. For the sake of convenience, the door is made of hinged door with handles - in order not to recline it all the time
Variation #1 - the usual woody end
The decorative end for a tree can exist without the help of others, the operation of its production is simple enough. For the sake of the lid, we need to choose a strong wood species - elm, aspen. It is allowed to extract pine, but the woody species of this tree is softer. The size, type of the product is determined by the agreement of the type of structure and the throat of the well.
It is easier to execute the cover in the form of a hatch. You will need the nails, hinges, measuring instruments, dry boards with grooves, handles, hinges, 6 bars (20-30 cm for one lid), hacksaw, strong rubber belt, screwdrivers, hammer.
A wood cover is better to act double. This is done so that in the winter it does not freeze. It is permissible to perform a folding or detachable lid - which is specific, it is enough, during the compilation of the work plan. The folding end for the well for hinges with a comfortable wood handle is convenient and easy to manufacture. The hinges and the carved shaft are appropriated by the ingenious design imaginary visibility
The case begins with the device of the crate and the necessary measurements. To ensure that the hatch is firmly in the neck, it is absolutely necessary to operate the crate. It is made of bars according to the size of the neck. For the skin of the structure it is allowed to remove the tree. To it the iron hinges are fastened. Hinges can be exchanged with a rubber strap - the only end of it is nailed to the lid, another - to create. The real artless variation of the well is a wooden lath, wooden boards. In the cool winter conditions it is recommended to operate two such covers and lay a heat insulator between them, this will help the water not to freeze
The main functions of the 2nd leaf (if you chose this variation) is additional defense and overlapping gaps, if they eat. For the sake of strength, the lid is attached to the center at the bottom. Two similar covers are made - the lower and upper ones. The lower one is installed in the lower part of the neck, the upper one - in the upper part. In winter, for the sake of warmth, a pillow of grass is placed between them. If in your region the temperature drops in winter before -20 degrees and more, the double end is inevitable - if it freezes.
The most ordinary hand for the sake of a wooden cover - packed parallel to each other bars. However, for the sake of greater convenience and aesthetics, it is possible to extract ready-made wood or iron handles. Which concerns the castle is a matter of personal choice. Some use locking devices to ensure greater safety of the well in the absence of owners.
Then the production of the lid is allowed to reflect on the book, how. The usual options are two: to perform an imaginary house for the pillars or to install a flat roof of round or rectangular shape. The roof can exist as a gable in the shape of a house, flat, round, inclined - for your opinion. It is allowed to extract different materials for its decoration - natural and bituminous shingles, metal, and vine, grass, boards, stone, carved decor, etc.
Variation #2 - the end of the textolite
The end for the well can be made from textolite and iron corners. For its production you will need a textolite, a sealant, profile pipes, cement, handles and loops, tape measure, welding tools, bolts, screws, a screwdriver, and a hammer. Textolite is a strong layered substance impregnated with resins. It is not difficult to cultivate it, and it may take a long time to serve such an end
Using roulette we make measurements, cut iron corners at an angle of 45 °. The purchased four segments are welded into a quadrilateral. For the sake of the carcass's strength, the corners are welded from the outside and from the inside, welding traces are removed by the Bulgarian.
We cut profile pipes in such a way, so that their length was for centimeter shorter than the length of the corners. In the frame of metal inserts pieces of pipe in accordance with the perimeter of the base, and weld them to the base, the seams are processed by the Bulgarian.
Then from the textolite is made two plates, appropriate to the size of the frame. Intermediate between the plates is the discharge of the heat insulator, then they must be fastened together with screws, the seam should be treated with a sealant. For the connection of the resulting cover and the frame, we use loops that can be mounted using bolts or welding.
The end for the well from the textolite is ready. For the installation for the well, formwork is made of boards, cemented continuously. After installation, the frame with the lid is covered with a layer of cement. In order to use the lid was more convenient, it is screwed to the shaft. It is allowed to throw a construction like eating, and it is allowed to paint it for the sake of giving a more aesthetic appearance. It seems like a variation, it is allowed to perform or bribe a finished plastic lid. It can be retrieved as temporary or non-stop, if in your region the winters are not extremely cool
For the production of the lid, it is also permissible to remove stainless steel, all this variation is more suitable for a well of reinforced concrete rings.
Variation #3 - pommel for the sake of a well in the shape of a house
The end can exist and is made in the form of a (gable roof). The beginning is made by the frame according to the same technology as the gable roof, however, of the corresponding dimensions. For the sake of access to water for the front slope of the"house"is a single-leaf door. The frame is made of wood, it can be painted or sewed with any kind of roofing material - it will be a very aesthetic decorative finish for the well. The top for the well in the shape of a house is not only a variation of the lid, but a beautiful imaginary element. In this case, the house is made of a smooth bar, the roof is finished with bituminous tiles, the structure with double doors for hinges and comfortable handles - a reliable defense for the source of water
The wood finish for the well, made by own hands, is not enough than the finished one - it is a convenient structure for protecting the water source through weather criteria and garbage. Having made it without the help of others, you will save property, also try yourself as a designer.
The options considered give an outlook on the book, it is kind of allowed to perform a lid for the well without the help of others. Its action will not take you much time, and your well will get reliable protection.