Water supply at the dacha with their own hands...

Water supply at the dacha with their own hands: permanent and summer optionsAny summer resident, and mostly accustomed to the comfort of a resident, realizes, like a water pipe in a suburban house. Without it, it is difficult to take care of because of the household plot, it is unrealistic to use home appliances, even to wash dishes or take a shower is problematic enough. That's why the owner of the house, after all, thinks about the book, like to perform a water pipe for the dacha with his own hands. Self-installation is a great frugality and an expensive attempt, who will need it for the maintenance or repair of the water supply system.
The structure of the autonomous aqueduct
In the standard, the installation of a water pipe is discussed for the step of designing a house: they make a step-by-step order, draw diagrams for the location of pipes and devices, calculate the estimate, and create the purchase of equipment. For the installation of the boiler-water meter unit, a small place for the lower floor with an area of ​​2-3 m? Is suitable. Installing technical devices and a bunch of water in one room, it is comfortable to take care of by the process of supplying water and regulate it. Soldering iron for the sake of polypropylene pipes can be leased - 250-300 rubles per day
Some components of the pipeline are assembled"on weight", and then they are already mounted in the room. It should be kept in mind that near 8 cm of pipe will be needed for welding, hence a separate piece of water pipe is calculated in advance. Some elements of pipes are better fixed securely for the place, using special holders
The location of the pipe laying is selected based on the layout of the rooms and the ease of installation. If in the room are planned hinged structures, the classic low installation above the floor can be changed by the upper installation - near the suspended ceiling. This pipe laying is optimal for bathroom or kitchen use. The upper position of the pipes (at the ceiling) has a bait pluses: a runaway warm-up and an operational drain of water
In order to adjust the pressure in the pipes, an expansion tank will be needed. The capacity of 100 liters is enough for the water supply system of a two-story house. It is not likely that the tank will be able to recruit 100 liters of water, it is filled for approximately one-third of the water (to be 3 atm. Pressure). Therefore, as necessary, it is necessary to bribe the expansion tank of a larger size. Installation of a water pipe in the boiler unit is best to begin with the installation of expansion and water heating tanks
Here she is an exception. Expansion tanks for heating - reddish color, tanks for water supply - blue. Installing filters for the sake of cleaning water
So that the water was not simply clean, but not dangerous and useful, should install a multi-stage filtration system. The abundance of filters in stores allows you to choose a more suitable sample, depending on the composition of the water.
Imagine that the water in the well, which is used for domestic water supply, is saturated with iron. In this case, the cleaning order of two filters is suitable, which can be installed in two monotonous tubes:
1 - ion-exchange filter, removing dissolved iron from water. An example of such a filter is the products of Big Blue. The advantage of the test tube is 1,500 rubles, the cartridge - 3,5 thousand rubles. If the value of iron in water is 1 mg/l, then the yield of the cartridge is 60 cubes. For the sake of lubricating the sealing rubber, they use sanitary jelly petrolatum, in order to freely collect the test tube
2 - charcoal filter for the sake of mechanical cleaning. The coal filter is necessary both for the sake of mechanical, and for the sake of chemical water purification
In order to find out if water is suitable for drinking, the sample should be handed over for decomposition. If the results are unsatisfactory, it is worthwhile to put the next filter, and water must be cooked before use.
Summer water supply - temporary building
The summer variation of the water supply system is suitable for summer residents, who leave the capital only during the warm season. The task of this system is to provide watering of beds and flower beds, work of spirit and home appliances. According to the end of the season, the situation is washed, disassembled and canned before the next age.
It is not difficult to equip the summer water supply of the dacha with your own hands. For this purpose, use a system of flexible hoses with adapters. The main burden is for the connecting elements, hence they are made of plastic or zinc-coated steel. Iron elements are stronger and more stable than plastic analogs, and they are more expensive. Summer water supply for the dacha is consumed exclusively in the hot period
There are two options for laying hoses (pipes):
The water pipe is located for the ground surface. Plus - lightweight installation and dismantling. Less is a breakdown.
The pipes are buried not deep into the ground, for the view there are just cranes. During the operation, the order does not interfere, but be willing to dig it out and dismantle it. One of the purposes of the summer water supply is the watering of the beds. Pipes lie loosely for the earth's surface
It is necessary to know, like to fulfill the water supply for the dacha, so that at the end of the season it is allowed to freely drain water from the pipes. For this, make a short slope for the sake of draining. For the lowest point of the water pipe a valve is installed: water is pumped through it, so that in winter it can freeze it does not break pipes and hoses.
The installation of a winter or summer system should be taken care of due to the security of the electronic network. To this end, use sealed connectors and moisture-proof sockets.