Which is all called pavers?
At first, a basalt or granite covering was supposed to be near the pavement, which was used not only for the paving of garden paths, but also for laying sidewalks and pavements. For the bridges, just right, a rough stone with a flat surface was used. Bars should have a similar shape and size. In our time, for the paving of huge areas, use chipped and sawn rectangles that have undergone additional grinding. In accordance with such paths from the paving stone, I want to walk. They fit perfectly into the overall landscape design, becoming an integral part of it
Paving stone as before, it has become much more varied, although the products from it are always characterized by considerable strength and constant attractiveness.
Cheap concrete coating
The main and indisputable importance of pavers from concrete is low dignity to be not bad consumer properties. This variation is often used for the paving of garden paths. To be made of parts of this coating, concrete is used, into which plasticizers and various kinds of colored pigments are added. Create such a pavers or a way of vibrocompression, or vibration. Despite the fact that the concrete pavement is relatively cheap, it is also possible to make a very beautiful covering for the sake of garden paths
Non-freezing clinker brick
Distinctive features of clinker paving stones are its longevity, strength and resistance to low temperatures. In the base of this coating is clay. According to its nature, such work is a brick. The appearance and color of it can be very different. Paving stone from clay looks very, very presentable. Its reconverted geometry makes it possible to do a picture unthinkable in accordance with beauty
Old stone modification
Rock - a classic of stone blocks. Depending on the external appearance, stone paving stones are divided for chipped, sawed-chipped and plain sawn. It can exist and stone, and basalt, and even marble. Such coverage can survive the master, who built it. For the sake of garden paths you can remove siltstone or stone. If such stones seem to you extremely expensive, use a cheaper artificial stone. Granite paving stones look safe and on a rainy day, and sunny. A feature of this coating is its longevity
Advantages of implementing such coverage
Between the vast number of advantages of this coverage, we have singled out only the main ones, which we will hastily then enumerate:
Outward pleasantness
Compression strength
Longevity
resistance to changes in the temperature regime, this is not just about frosts, but also about the heat
stubbornness to abrasion and mechanical damage.
Pavement allowed not only garden and garden paths, which are designed for pedestrians, and transport areas, for example. If significant loads are expected, the coating should be laid for the concrete base. This will not allow the stone to deform.
All the same, not enclosed in the cobblestone itself, determines the outward appearance of the track, but with what skill and love the work is done
Future paving stones and stylistic solutions
Stop #1 - preliminary work
The order of your site should be transferred for millimeter paper. We note for him the place of laying pavers. Now, knowing their extent and common place, we can dismiss the need for pavers. Do not forget to add 10% to the figure you got for a possible marriage. You need to buy dust, cement and gravel or crushed stone. Do not forget about geotextiles. Now we need to mark out the place using pegs and a nylon rope. Driving pegs should not be less than a 1-1.5 meter well-wisher through a friend.
Stop #2 - take out the land, prepare the base
We take out the land for such a depth, so that the future view of the path coincides with the ground level or there was a desire slightly above it. In an unpleasant case, the water that appears after the rain, is enough to accumulate for the paved areas and stagnate, or it will have to be eaten. Therefore, we consider the thickness of future layers of sand, gravel or crushed stone and add the height of the bar itself. The estimated size of the depth of excavation has come out. For some reason, the track we create with our own hands should look in the cut. Based on the thickness of each of the layers, it is permissible to find the depth for which the earth will have to be taken
We prepare the base, not regretting this function of forces and time. The earth should be well leveled, remove all unused pebbles and rhizomes from plants without it. We are striving for a flat surface, why do we fall asleep without leaving the hole, and we hamper the tubercles. Then we compact the soil. If you have a special tool for this purpose, you can do it yourself.
The earth should be covered with geotextile: the weeds will not germinate through this fabric and ruin your path. For dense soil, it is permissible to extract 10-20 cm of sand as the first layer. It is better to consolidate the gentle earth first with gravel, the discharge of which will be 10-15 cm. In any case, the discharged discharge must be perfectly compacted. Consistent with the views of professionals as a first layer, it is even better to use crushed stone in order to avoid the forthcoming deformation of pavers.
Increased attention should be given to those sites that have a fanciful terrain. In this case, cementing or concreting can not be avoided. Cement mortar is made from the calculation of one part of cement and 3 parts of small sand. 4 or 5 centimeters of cement cushion is pretty all pretty. Another unique variation of the cover, you can see for the photo below. Another unique variation of the alternate laying of layers, which should occupy the pavement. Do not forget about the book that the rainwater should drain from the path: a short slope to the edges will not hurt
Stop #3 - curb the border of the track
With the border, it does not matter which case looks neat and complete. For the sake of this goal, it is better to bribe ready-made curbs, which are used when performing construction work. A permitted to take and paving, just choose a large value.
If the track needs a curb, it is permissible to dig an additional trench along the stretched kapron cord. The cement mortar should be poured into the trench in accordance with the placement of the curb parts in it. Any component of the future edging of the track should be close to the previous one, and the edge of the border - bordered by a tight cord. To eat a special rubber hammer - a kiink, which is to excite the frame, so that he stood up unreasonably, like you intended. The curb can be laid using an adjacent edging board. This is a very useful method, which is the geometry of the structure in complete safety
It is very comfortable to strengthen the frame with a cut board. First it is allowed to fix it specifically in the dug trench, so that later, unswervingly close to it, have a curb rock or tile.
Stop #4 - laying the base sheet
Do not rush to start laying pavers, give the curb even the desire to dry the day. If you have a sand pillow, you must shed a lot of dust with water before laying the pavers. To lay paving stones is allowed by various methods. For the video you suggested, stretched threads were used as a guide.
Before, like you will evaluate the pavement, you can pre-reduce the box of edging boards. The recommended value is 1x0.7 meters. They are installed and fastened to the pillow, then proceed to the paving process. The paving is located tightly in accordance with the previously developed pattern. Do not forget to remove the height in order to test the property of the work performed. Excite elements of the coating should be using pavers. The use of yarns or wood boxes helps to save the geometry of the drawing, not to go out of the frame of the intended size, which is predominantly vital for the sake of huge work volumes
If you need to saw an element for the pieces you need, use the grinder, equipped with a diamond disc. This may result in the design of complex areas near some object: a porch, a garden statue or a water body. To have a vibrating rammer with a rubber base, in order not to spoil the pavement, use it: the view must be dense. The track can exist not only complicated by its own special ornament. This is done in several levels, which requires special skill
Finishing the track
For a worn-out appearance of the track, apply a discharge of wet sand, then simply rub it into the joints using a mop with a hard pile. The case is completed. The final finish of the finished track is made well known from the times of grandfathers. After that, the work is allowed to count the entire completed
Now you see, like the park decorates the pavers, laid with their own hands, in the first neat path with a curb. If everything is done without delay, the second one is quite easier to pave you.
Video with examples of installation works
Video #1:
Video #2:
Комментариев нет:
Отправить комментарий