Making a rope ladder: 3 ways of making a universal design

Making a rope ladder: 3 ways of making a universal designThe rope degree is a comfortable and necessary tool in the farm. When folded, it takes up a minimum of space, but if necessary, if other march designs can not be used for any reason, it always comes for help. The rope degree is unchangeable in case of repair of inaccessible areas for the roof. Without it, you can not manage, if you eat the need to go down into a tight well. In a house where a child is eating, such a degree will fulfill the function of sports equipment, becoming, for all that, the favorite toy of the baby. We propose to make out the three most common in the execution of the rope ladder production variant, to implement for the sake of practice which anyone is capable of.
Rope ladders consist of 2 main parts - steps and ropes. Some craftsmen for the arrangement of a self-made rope ladder adapt the cuttings through shovels, which are obtained in horticultural or building centers. Instead of wood racks, it is also convenient to remove pipes made of plastic or light metal alloys. Unconditionally, through the material of production steps are not required to have sharp angles that can move the movement and hurt the human. Almost always the steps of the staircase are made of wood bars 4-7 mm wide, round or square
Ropes for the sake of a hinged ladder are made like for the base of natural, causeless and synthetic materials. The natural fibers of flax, hemp and cotton are strong. They are great for the arrangement of the"Swedish"wall and sports corner. Synthetic materials, such as kapron, polyester, nylon are considered more convenient, because they differ in wear resistance and excessive resistance to stretching. In addition, they are famous for their resistance to solvents, in the book of the number of turpentine, gasoline, alcohol. Synthetic materials do not lose their properties even in case of wetting.
The best rope thickness for the sake of a rope ladder - through 7 before 9 mm. Ropes of this thickness will not cut hands during use and will ensure, at the same time, sufficient reliability of the construction. The selection of the materials of the rope ladder depends only on the purpose for which purposes the work is rather used: for the sake of translating works for the open air or in a closed dry or wet room
In any case, the hanging ladder is made less than 15 meters long, maintaining the gap between the steps in the range of 25-35 cm. Since the rope degree belongs to the number of mobile structures, the credibility of the finished structure is not forced to win 20 kg. Pendant ladder desire to equip with stops that will not allow the construction to touch the wall. The length of the stops can vary in the range 11-22 cm.
Variation #1 - tying the rope around the steps Two pieces of strong rope 20 m;
7 wooden slats, 35 cm long and 3-6 cm wide,
1 roll of thick coarse thread
Power tools (drill, jigsaw) ;Saw for the sake of woodwork and a construction knife.
All the cuttings that will perform the function of the steps of the ladder are interconnected by means of 2 ropes. The type of cuttings should be polished. This will avoid in the forthcoming problems the appearance of scratches and splinters in the palms. The length of the rope should be disassembled, taking into account that then knotting the knots in the finished form is quite twice shorter than the original length of the rope. Performing a reliable and strong rope ladder that is relaxed enough to abstain from the authority of an adult is easy enough So that the ropes do not dissolve during the weaving, their ends should be burned. This can be done using a hot knife for cutting material. To prevent the opening of the rope will help and wrapping the ends of a thick coarse thread.
Let's get to work. Before tying the first crossbar, at the end of each rope we tie a loop of diameters of 6 cm, for which we will hang the ladder in the upcoming one. Now we take the first degree and we tie a rope for it. Fastening of the rope is performed using the knitting technique of a self-tightening knot"constrictor", who provides a very good fixation of the crossbeams.
Pleasant management according to the knot knot constriction:

However, even fixing the steps with the help of a reliable"constrictor"node, there is always the possibility that steps can slip. In order to prevent this, according to both ends of each step, the desire to execute grooves. In order to prolong the building of the crossbeams, cuttings desire to cover with paint or to treat with a special compound, who will protect the tree species, but at the same time it will not make it slippery. For a distance of one to two cm across the edges with a knife, we first make cuts of width 1 , 5 cm and a depth of 3 cm. Later we form small grooves with rounded edges
After retreating a gap of 25-30 cm through the first stage, we tie the second crossbar. In accordance with the same technology, we fix all other steps without stopping before the time until the degree reaches the desired length.
Before starting tight nodes around each of the bars, it is necessary to make sure that the steps are placed parallel to each other. It is very difficult to untie the"constrictor"in order to re-shuffle the bundle. To arrange the steps for a similar distance in parallel to each other, a special tool allows: fix the crossbeams between the racks rather tightly, and tie the outside edges with a rope
Alternately connecting the all-in-one steps, the ends of the ropes also form in the form of loops.Variation #2 - crossbeams with through holes
The peculiarity of the second method of production of a hinged ladder is the need to make holes in the steps. Through them we will stretch the ropes, collecting all the bars in a single structure.
In the proposed version, we will extract wooden cross-bars with a length of 40 cm in length and a synthetic nylon rope. In each cuttings, retreating 3 cm from both edges, using a drill, make apertures 1.5 cm across. After making a couple of holes, do not forget to make sure that their diameter corresponds to the thickness of the rope. After that, the bars are painstakingly sanded using an abrasive or grinding machine, and processed with a disinfectant.
The nylon rope, whose length is 10 meters, is cut for 2 equal parts. We process the edges with a formidable thread or a red-hot metal. Let's start assembling the structure: for the ends of both ropes, make loops or knot the knots. We stretch the loose ends of the rope through the through holes of the first crossbar.
We use the same tool without cutting the same tool, fixing the cross bars between the wooden blocks nailed to the board. The long tail of the rope is folded in loop, lift above the crossbar and wrap around the rope knot. As a result, we get the first step, fixed between two nodes. In accordance with the same technology, we collect other steps In the case, if there is no sense or time to make a rope ladder with crossbeams, it is permissible to perform the construction, taking the steps to which the looped rope will perform.
Video masterclass according to the knitting of the knotted ladder without steps:

The variation of the ladder with the"burlat"loops is also fascinating. This technique of weaving is good for those, which in the end comes out not a bundle, but a comfortable loop. In the loops you can interfere with your legs and wrists in order to transfer for their authority and calm down if you get tired.
The"burlatsky"loop is easy to operate: twist the rope twice, forming a thing similar to the figure-eight. The lower"tails"of the figure eight are stretched, and in the resulting circle we stretch the higher part of the twisted loop. Then use the loop loosely, using a rope for other purposes.
Step-by-step control according to the manufacture of the"burlat loop":

Зная нехитрые секреты плетения канатной лестницы, вы можете в всякий момент сконструировать комфортную конструкцию, иногда настолько неподменную в хозяйстве.