Manufacture of paving slabs with your own hands...

Manufacture of paving slabs with your own hands: process analysis from kneading to dryingWhen planning the improvement of garden paths for your own private plot, you always want to make multifunctional and at the same time wonderful elements of landscape design. The material for the garden paths can be served by wood spills, natural rock, gravel ... However, still more popular among the owners of suburban areas as a covering for the sake of sites and paths is the paving slab, which has a pretty exterior and stunning high-quality features. Paving tiles with their own hands is a rather unusual addition to the design of the site, in harmony with the style of the house and garden.
What are the advantages of self-made tiles?
The action of paving tiles with their own hands is quite labor-intensive and quite long, but with all that, it's quite an enticing action. The result of work are exclusive products, successfully combined in picturesque paths. Combining 2-3 product configurations it is allowed to make unusual ornaments and unusual"snakes"
As molds, it is also likely to also remove plastic containers for food products that have sufficient flexibility, softness and strength. With the help of containers of unmodified shapes with even sides and straight angles, it is possible to make rectangular"bricks". Such tiles can be laid together freely together
Making a solution
The necessary components are ready, we can frankly activate exclusive paving tiles with our own hands. Stir the sand and cement mash allowed like a manual method, for no reason and with a perforator, which has a nozzle mixer. Planning to make coatings, calculated in several tens, or even hundreds of tiles, for the sake of facilitating the process, the desire to stock up a concrete mixer. Excellent, if she already eat in the owner's arsenal. After all, such a construction environment can be extracted for many purposes, starting with the concreting of the streambed in the garden and finishing with the fixing of the fence posts. In a container, which can be used as a pelvis or the weather, 1 part of cement and 3 parts of sand are poured
Mixing the mortar in a concrete mixer to obtain a homogeneous mass, one must first sleep the dust, and then cement is poured into the constantly rotating container.
Water in the mash to add evenly, without stopping to stir the solution. Excess water in the solution can lead to a decrease in the strength of the finished concrete. In order to prevent this, for the step of mixing and pouring, water-repellent additives and reinforcing fiber are added to the solution. The mixture of the solution must be doughy: a little watery, but not slipping from the trowel
Painting tiles in the most unusual coloring is allowed with the help of inorganic pigments, which have an increased resistance to light and atmospheric phenomena, as well as alkaline environment. The number of dye for the sake of solution is selected by the"sample method", starting from 30-50 g and gradually increasing the proportion. Uniform coloring of the amount is obtained in accordance with the expiration of 5-7 minutes. The desire of the composition is determined in accordance with the absence of lumps and uniform coloring only the volume of the material.
Pouring into forms
Before pouring the form of the desire to lubricate with emulsol or at least some kind of oil (it is allowed even by used machines). This will allow the following to facilitate the molding of the frozen product. Forms are filled with substance and stamped with a trowel
Increase the strength of the product is allowed by pouring into an iron grid filled with concrete before the half, a rod or wire, and then adding it with the remaining substance before the edges.
For the sake of that, in order to compact the cement mass and to expel excess air bubbles from the solution, one must make vibration of the concrete. For these purposes, a vibrating table is used. Because of the lack of such a design, a shelf or shelf may cause it to be a candidate. For the sake of creating a vibration, it's enough to perform fairly tapped kiyankoy according to the table.
Drying and deepening of products from containers
Pill-covered forms are covered with a polyethylene film and aged for 2-3 days. In this interval, proudly to be pleased with the height of the water. For the sake of this, the hardening products are sometimes wetted by the desire to wet. The room where the blanks dries up must be sheltered through direct sunlight
As a result 2-3 days later, the casting of the tile is allowed to be formed, slightly pushing aside the sides and shaking. Dry work in the shade should be again in the course of 3-4 weeks. During this period of time, the tiles will acquire sufficient strength, and it can be quite removed as a cover of garden paths and recreation areas.
Video master classes in accordance with the manufacture of paving slabs