Features of"wet"and"dry"styling methods
The development of the laying of artificial and natural stones, having a regular geometric shape, is based on the already familiar principles of brick laying. However, for the work with"wild"stones, recognized by their own imperfection of form, it is again necessary to keep accurate knowledge and skills.
Stacking of the stone is allowed to do, for example, on the basis of a binding and binding solution, without reason and without its introduction. Proceeding from this,"wet"and"dry"masonry methods are distinguished in construction. A relevant feature of the"dry"masonry is a detailed selection of very matching pebbles and a meticulous fit between them
"Dry"development is mainly difficult to work with natural"torn"stones, any of which has a characteristic thickness, height and width. In order to increase the stubbornness and reliability of the masonry, without interruption the gaps between the stones are filled with earth or with fastening mortar solutions. This method is often used to build low fences and fences, and also be laid curbstone. Here's a good example of a dry masonry:
style="width: 650; height: 360;">
The"wet"masonry is used to be the construction of large buildings, which are integral whole structures. This method of laying is simpler in execution, since it does not foresee the painstaking adjustment of the neighboring parts.
Filling gap and emptiness between the stones mortar ensures the fidelity and stability of any construction
Suggestion. If the solution has got to the face of the stone, do not wipe it off with a damp cloth at any time - this will lead to the one that will be blocked by the hole in the rock. It is better to leave the solution for the time, so that it stiffens, and then remove it with a spatula and wipe the stone with a dispassionate rag. Since the ligation of the butt and boulder joints of the wrong shape is very difficult to perform, during the laying of the natural stone, there must alternately be a circle of poking and spoon stones. This dressing is based on the principle of chain dressing, which is often used to be brickwork. Thanks to this technology, the structure is more robust and long-lasting
For the finishing step, use a putty knife to grout the joints and wash the cover as needed with running water.
As an example of this"wet"technology is allowed to punish here is such a retaining wall:
The"wet"masonry is used to be the construction of large buildings, which are integral whole structures. This method of laying is simpler in execution, since it does not foresee the painstaking adjustment of the neighboring parts.
Filling gap and emptiness between the stones mortar ensures the fidelity and stability of any construction
Suggestion. If the solution has got to the face of the stone, do not wipe it off with a damp cloth at any time - this will lead to the one that will be blocked by the hole in the rock. It is better to leave the solution for the time, so that it stiffens, and then remove it with a spatula and wipe the stone with a dispassionate rag. Since the ligation of the butt and boulder joints of the wrong shape is very difficult to perform, during the laying of the natural stone, there must alternately be a circle of poking and spoon stones. This dressing is based on the principle of chain dressing, which is often used to be brickwork. Thanks to this technology, the structure is more robust and long-lasting
For the finishing step, use a putty knife to grout the joints and wash the cover as needed with running water.
As an example of this"wet"technology is allowed to punish here is such a retaining wall:
style="width: 650; height: 360;">
Action and rules for laying artificial stone
As an example of the production of artificial stone by our own hands, we offer you this kind of video instruction from 2 parts:
Action and rules for laying artificial stone
As an example of the production of artificial stone by our own hands, we offer you this kind of video instruction from 2 parts:
style="width: 650; height: 360;">
style="width: 650; height: 360;">
Now you can talk about the rules of installation. In the process of laying an artificial stone, it is permissible to use the"with stitching"method or without them. In the first variant, the distance between the stones is maintained between 1-2 cm, be the second - the stones are compacted in a well-liked manner to a friend
Artificial stones in most of their own have a rectangular shape. Therefore, it is allowed to apply the technology of laying bricks to work with them. Laying in a"spoon"is a method of laying a brick, where it is placed with a long edge to the outside of the structure, and a clutch is a"poke"- if the rock is placed with a narrow edge.
For the construction of structures of artificial stone in most cases, the traditional method is used, which in the process of"spoon"laying a separate future system is located with a certain displacement of bricks relative to the previous one. To be such a method of dressing the vertical seams of closely spaced rows do not coincide, reinforcing the build strength
Among the more popular decorative methods of laying stone, you can also distinguish: Flemish, British and South American.
Decorative stones are used not so much for the sake of erecting buildings and creating parts of landscape design, but rather for their design. The basis for their production is: porcelain stoneware, agglomerate or cement mortar. The appearance of facing artificial stones can be repeated features of any kind of natural stone: marble, limestone, slate ...
In order to preserve the neat appearance of a neat appearance in the course of a long time, the decoration of the decorative stone should be managed closely tips:
Consider the"pattern"of the masonry in advance. The change in the shapes and sizes of pebbles made in light and black colors will give the surface an innate and all the more attractive appearance.
Strictly implement the masonry technology. As a reward through the pebbles used for construction, decorative stones should be laid out in rows, starting from the top and lowering down. This will prevent the glue from getting to the appearance of the stone, which is difficult to clean.
Use the glue indicated by the manufacturer of the facing stone. The adhesive is applied using a spatula for the base, for no reason, and for the reverse side of the stone.
Masonry is made for an aligned, fat-free look. For the best grip, the base should be moistened with water. The tile with the applied adhesive composition should be pressed against the surface of the base with vibrating movements and fixed for a couple of seconds. During laying, you should run vertical long stitches.
Then the end of laying, so that the imaginary rock has served like it is allowed longer, the desire to cover it with protective soil or hydrophobic.
Now you can talk about the rules of installation. In the process of laying an artificial stone, it is permissible to use the"with stitching"method or without them. In the first variant, the distance between the stones is maintained between 1-2 cm, be the second - the stones are compacted in a well-liked manner to a friend
Artificial stones in most of their own have a rectangular shape. Therefore, it is allowed to apply the technology of laying bricks to work with them. Laying in a"spoon"is a method of laying a brick, where it is placed with a long edge to the outside of the structure, and a clutch is a"poke"- if the rock is placed with a narrow edge.
For the construction of structures of artificial stone in most cases, the traditional method is used, which in the process of"spoon"laying a separate future system is located with a certain displacement of bricks relative to the previous one. To be such a method of dressing the vertical seams of closely spaced rows do not coincide, reinforcing the build strength
Among the more popular decorative methods of laying stone, you can also distinguish: Flemish, British and South American.
Decorative stones are used not so much for the sake of erecting buildings and creating parts of landscape design, but rather for their design. The basis for their production is: porcelain stoneware, agglomerate or cement mortar. The appearance of facing artificial stones can be repeated features of any kind of natural stone: marble, limestone, slate ...
In order to preserve the neat appearance of a neat appearance in the course of a long time, the decoration of the decorative stone should be managed closely tips:
Consider the"pattern"of the masonry in advance. The change in the shapes and sizes of pebbles made in light and black colors will give the surface an innate and all the more attractive appearance.
Strictly implement the masonry technology. As a reward through the pebbles used for construction, decorative stones should be laid out in rows, starting from the top and lowering down. This will prevent the glue from getting to the appearance of the stone, which is difficult to clean.
Use the glue indicated by the manufacturer of the facing stone. The adhesive is applied using a spatula for the base, for no reason, and for the reverse side of the stone.
Masonry is made for an aligned, fat-free look. For the best grip, the base should be moistened with water. The tile with the applied adhesive composition should be pressed against the surface of the base with vibrating movements and fixed for a couple of seconds. During laying, you should run vertical long stitches.
Then the end of laying, so that the imaginary rock has served like it is allowed longer, the desire to cover it with protective soil or hydrophobic.
Комментариев нет:
Отправить комментарий