The basis for the production of hinged seats served as an ordinary rocking chair. Wicker structures made of rattan or vines became more promising for the sake of furniture tests, because they do not weigh very much, but at the same time they have good strength. As a result of such furniture tests, designers designed hanging chairs resembling the shape of a half ball
Semicircular constructions are presentable in that they allow moderately assign the entire load. In addition, they are comfortably suspended by installing the structure at the highest point.
The frame of the hinged armchairs can have quite a few options. Wicker chairs made of vine, rattan, clear acrylic or plastic have a ruthless body. For the sake of convenience, they are complemented by decorative cushions and soft mattresses.
The hammock chair is a softer variation of the curtain. For swinging soft pillows, you can always pamper yourself in moments of relaxed relaxation.
The cocoon-chair, closed from 3 sides by wicker walls, is perfect for permeating and abstracting through the outdoor bustle
p> Instead of the usual rattan or vines to be decorated with hinged chairs, they are often used often synthetic materials, thanks to which the construction becomes lighter, flexible and noiseless.
Навесное кресло-гамак
Сконструировать такое кресло легко. Должен чуть держать базисной техникой плетения макраме.
For the production of the chair we will need: Such a hinged chair will make for the site an unusual atmosphere, which is conducive to peace and tranquility.
Two iron hoops of different diameters (for the sake of the seat D=70 cm, for the backrest D=110 cm)
900 meters of cord for the sake of weaving;
12 meters of sling
2 thick cord for the sake of joining rings
2 wood rods
Scissors, tape measure
Working gloves >
For the arrangement of the chair, it is better to take hoops made of metal-plastic pipes having a section of 35 mm. Metal-plastic pipes of this thickness are internally protected by an iron braid and are capable of providing sufficient strength of the hinged structure.
In order to execute the hoop from the pipe, we first determine the length of the segment, applying the formula S=3,14хD, where S is the pipe length, D is the required diameter of the hoop. For example: for the production of a hoop D=110 cm, it is necessary to measure 110x3.14=345 cm of pipe. For the connection of the pipe ends, wood or plastic inner inserts of the corresponding diameter, which are fixed with ordinary screws
For the sake of weaving, a polyamide rope with a polypropylene core of 4 mm width will go completely, to purchase who is allowed in the building store. It is not bad for those that have a soft kind, however, in reward through cotton fibers to be knitted is able to make denser knots that do not"disintegrate"during use. So that there was no discrepancy in the color and texture of the material, the full size of the cord is a desire to buy at a time.
Stop #1 - a winding product for the sake of hoops
Our task is to cover the iron look hoops. For the sake of design, 1 meter of hoop tight coils goes around 40 meters of cord. We do the loops slowly with a good tension, imposing the rope to appear and neatly.
In order to make the winding more dense, make a tightening every 20 turns, tightening them in accordance with the direction of the winding before the stop. As a result, we should get a smooth and denser kind of braid. And of course, in order to protect your hands through calluses, this job is better to live with gloves.
Stop #2 - weaving the net
It's possible to extract any makram . It's simpler to take a chessboard with flat knots only from the base. The grid is plaited with a double polyamide cord, attaching it to a braided double-knot hoop
A nice video guide according to the weave: p>
Во пора плетения смотрите из за силой натяжения шнура. Через этого довольно подчиняться упругость готовой сетки. Свободные концы узлов покамест отвечать не стоит. Из их дозволено собирать бахрому.
Stop #3 - build the structure
Braided hoops are assembled into a single structure. For the sake of this, we fasten them from the first edge, wrapping them together with one cord. From the opposite side of the winding, we place vertically two wooden rods that will support the back of the structure
The length of the support rods Anyone can exist and is determined only by the selected height of the back. To prevent the hoops from slipping, make shallow cuts for the 4 ends of the wooden bars.
Stop #4 - decorating the back of the chair
Weaving the backbone can exist for any reason. Weaving starts from the upper part of the back. Evenly sinking to the seat. The free ends of the cords are tightened for the lower ring,If the decoration is braided, the ends of the threads are fixed in the lower part of the back and we make out their fringe. Strengthen the design will allow two thick cords that connect the back to the seat. Luxurious hinged armchair is the end. It remains to attach the straps and hang the chair for the chosen room.
Hinged chair with cover
If you are not willing to work with a weave, or according to some other reasons, the main variation to you not suited, it can be suitable for one. A comfortable, smoothly swinging family is an impeccable place where you can relax, forget about your own dilemmas, or just get some sleep.
In order to perform such a hinged chair, we will need: Strong fabric cut 3-1.5 m
Fleece, doublerine or trouser tape
Iron buckles - 4 pcs
Slings - 8 m;
Iron ring (for hanging the chair);
Sewing machine and the most necessary tailor furnishings.
Make a hoop is allowed from the metal-plastic pipe , which is sold in the form of a coiled cove, or from bent wood. However, the use of a tree should be ready for the fact that, with the effect of the temperature drop, the hoop can quickly dry up and deform.
Stop #1 - cut the cover
Of the three-meter cut we have two equal squares, a separate size of 1.5x1.5 meters. Each of the squares separately folded four. In order to execute a circle from it, from the central angle with a radius of 65 cm, we mark the circle and cut it out. In accordance with the same principle, we make and cut out a circle from another square. For each of the resulting circles, retreating across the edges for 4 cm, a dashed line outlines a home story.
We are planning openings for the sake of lines: we fold the circle four times and iron it, so that the folds are the landmarks. The first two lines should be relatively wriggled about an angle of 45 0 , the 2nd - 30 0 . After marking the corners around the slot space for the sake of the lines, again lay out a pair of the circle and iron it.
Подписаться на:
Комментарии к сообщению (Atom)