Tapestry for climbing plants: examples of erection by your own hands

Tapestry for climbing plants: examples of erection by your own handsTo garden and garden plants cheerful harvest, you need watering, fertilizers and conditions for their proper development. Climbing plants, for example, need support: because of it, it is enough to cling to the trunk if it crawls upward. For the sake of this purpose it is more convenient to just extract the trellis - a special design that will help the garden lianas grow, not sagging, and a pretty good decorative ornament of any area. Shrouded in greenery, it forms a kind of openwork barrier: it creates smallness where it needs to eat, hides through the eye the outbuildings. It seems to be building an ordinary tapestry with our own hands, and for this we need, we'll tell you.
A simple structure from the branches
Spring is the time for the remainder of the plants. Sprigs, a diameter of about 1 cm, often go to waste, but in fact they are allowed to design an unassuming, but attractive trellis for the sake of different climbing plants. Peas, honeysuckle or hops are not extremely burdensome plants for the sake of lightweight construction from branches. For the sake of work, it is proud to extract flexible twigs so that they do not break and do not split. For the sake of forming a number we need a secateur and wire. Do not hurry to give birth to the remainder of the spring residue of the branch: they can get them ordinary, but multifunctional trellis for the sake of loaches, peas, hops
The number of branches used in the work depends on the scale of the future structure. In any case, there can not exist less than 2 10-s. Branches should be divided according to the size, so that after not time to search for a suitable rod. If you eat shoots for branches, delete them.
The first branch is stuck into the ground for a depth of 10-15 cm. The subsequent rod is placed at 10 cm through the first, but at an angle of 60 degrees to it. We bind the rods between them by a wire to the tip. We repeat this deed as often as necessary, so that the trellis of the right size is available. Formed rhombuses try to act in the right form, then the whole structure is rather neat and will last longer. Performing trellis from the rods will be able to separate: for this special abilities are not necessary, just be patient and do not regret the work for two hours
Small costs brought tangible results. Look how beautiful and presentable look the jar of different species for this openwork design
The cutting ends of the branches are cut off. A rectangle has to be obtained.
A more complex and reliable building
If we decide to perform a universal trellis, which will be able to withstand a languorous vine and will serve for quite a few seasons, we will have to spend more time and extract other materials.
Here's what you need to prepare:
planed blocks of wood with a size of 30x3 mm;
Curve a strong log or piece of cuttings shovel or rake
wood screws for the sake of woodwork
disinfectant solution for impregnation
dowels 8-10 mm in a porcelain;
waterproof adhesive
стамеску;
Hacksaw;
Screwdriver
Electric drill
Brush and paint.
Then, like you are ready to prepare all the time, you can start to work.
For the production of a rectangular frame, the row should take out wood bars: two horizontal bars (according to 1.8 m) and two vertical (according to 2.2 m) bearing bars. The width of the finished grid is 42 cm, therefore the crossbeams will be 35 cm long. We cut them in advance. To be able to produce such designs is to be proud not to hurry and all to act accurately, here the result will not only be multifunctional, but beautiful and long-term
We mark out the bars, making incisions for the tree, so that cross bars can be intervened. The gap between the cuts is 35 cm. Using a chisel, the proportion of the wood in the notches is taken out. Fasten the crossbeams in wood bars will help the hydrostatic adhesive. If such a method of fixation seems to be less reliable, then it is permissible to extract screws in the work. The vertical and horizontal parts of the grid are fastened with screws. It looks like a tapestry that is already attached to the wall and braided with plants: its presence allows the loaches to paint the building without destroying it
The building is ready, it remains to fix it, for example, for the wall of the house. For the sake of drilling holes in the wall of the house near the dowel, we use a drill. Between the wall and the trellis, you need to save a small space. For the sake of this, cut the cylinders 30 mm long from a piece of cuttings. To the lattice stood endlessly, it must be impregnated with an antiseptic and, be desired, covered with paint. Dry construction is fixed to the wall.

Two types of designs around the grapes
It is right to design and install a row for the sake of grapes is very proud. Its long branches should be given such an arrangement, so that light and air for the development of the plant and ripening of the fruit would be enough. It's time to eat for the sake of preparing the structure: it will be useful only for the 3rd year. In the first two years of quite a temporary support, the occupation of which performs excellent stakes.
Variation #1 - single-plane vertical trellis
A non-vineyard vineyard, growing along the paths or walls, it is better to arrange for a vertical trellis. The base of the structure will be poles (diameter 8-10 cm, height -2.5-3.5 m) made of metal, concrete or wood. Wood species are better to choose hard rocks (beech, chestnut, oak or white acacia). The lower end of the column (60-70 cm) can be burned, covered with resin or hold a week in a 6% solution of copper sulfate. This will extend the term of their building. A single-plane vertical trellis allows the grapes to grow right and take enough sun, air and heat to make their bunches better filled with juice
Have pillars of planted plants for a distance of more than 3 m well-wisher through a friend. Mark the place of installation of the pillars and the first ones dig in the last. We fix them with anchors or stoppers, which will allow the trellis to be tightly stretched. Here's what it's all about:
Hope. The great rock is tied with wire and fastened to the upper end of the post, then buried in the ground in a meter across its bases. To be such fastening, the posts are set obliquely.
Emphasis. The vertical fastening of the last pillars requires the installation of struts in their lower part from the side of the row. The high end of the strut goes into the notch for the surface of the column, and near the bottom end is a rock buried for half a meter into the ground.
Orient the trellis in the direction from the south to the north. Wire should be removed zinc coated. Have it in three or four rows, fixing for the last pillars seriously, and for the middle - with the help of staples. Causelessly it is allowed to pull up enough to be a sag. The lower structure is forced to be 30-40 cm across the earth, and a separate future one - in half a meter through the preceding one. Tension the wire from the top row to the bottom row.
Variation #2 - two-plane structure
If you eat watering and the land is grassy, ​​you are allowed to execute your own hands a two-plane trellis for the sake of grapes. This structure is more difficult than the previous one, but it allows to significantly increase the above-ground share of the plant, providing it with air, heat and light. This education guarantees a good collection and good quality of berries. The two-plane structure is used in the criteria of grassland and watering: this structure helps to obtain a large gathering for similar sized territories
The two-plane structure consists of 2 ordinary tapestries, which are placed near the corner well-wisher to a friend. The structure may have transverse bars, the upper of which is twice as long as the lower one. The ends of these bars are conveniently removed for the sake of fastening for their wires. Such a series can get used, like in the criteria of industrial production of grapes, for no reason and for an ordinary moderate garden plot
Features of erecting a support for the sake of cucumbers
Infinitely to delve into the book, like to perform a multifunctional tapestry for the sake of cucumbers, it is not necessary: ​​this structure does not necessarily exist beautiful. Provide generous collection - that's his main destiny.
For beds, we establish support posts for a distance of 2.5 m well-wisher through a friend. To the highest part of each column, we beat a wooden bar of 80 cm in length. It joins bars with crossbeams without interrupting each other with a spacer stick. It is located in the middle part of the structure, its length is equal to the total length of the bed. In 25 centimeters, according to both sides, nails are driven into the cross-bars through the spacer bar. For them wire is tightened. The trellis is ready. A number for the sake of cucumbers do not for the sake of beauty, but for the sake of obtaining the greatest crop of culture, which does not prevent them from being cautious and in their own way to paint melon
Look at this diagram row. It is very carefully and of course depicts the whole construction and finishes a complete view of the book, like specifically it must be done correctly
The twine is cut for a length of 2.5 m. Its only end is fixed to the stem of the plant, and the second - to the wire. This position of plants allows them to run diseases associated with waterlogging of leaves and stems. The place of the garden is being arranged, and the crop yield is growing.