Eight ways to apply mosaic in the design of the...

Eight ways to apply mosaic in the design of the site and the homestead territoryWarm summer days are not unreasonably long, like I wanted a wish. Save a positive age, its sunshine and conviviality rather hunt and in the offseason, when the light day is short and we do not have the brightest paints. Among other things, eating such an excellent method of decorating landscape parts like art. Thanks to this simple, for the main eye, the method of decoration is allowed to impart exclusivity to at least some facilities for the site. Modern designers forced us to start again this forgotten dose, returned to it the former pleasantness and cold. It seems for practice allowed to apply the mosaic for your own site, we will try to tell you.
Choosing a material for the sake of tessellations
There are a variety of materials with which you can do magic mosaic compositions. In this capacity can go not only the standard glass mosaic tiles purchased in the store, and quite a sudden product, which we usually neglect. For example, bottle caps made of plastic. A very good food is served for tea. Immediately for him put food with buns and a vase with jam, and fragrant will probably pour out according to cups
General rules for performing"mosaic"work
To art like a minimum of 10 years of fun you with its presence, listen to our advice:
Choose an image that is guaranteed not to excite you quite enough: try not to extract extremely abundantly different colors
the glue or mortar is forced at once for the sake of mosaic parts, and for the reason for which it is rather tolerant
a suitable smooth surface error is assigned to the primers;
Different primers are needed for absorbing (wood, concrete) and non-absorbent (metal) substrates
Materials that have to be used all the time must exist for outdoor work
It is advisable to execute a sketch in developing a complex mosaic pattern. Scale the image before laying out for the ground. Suppose we are going to make a round mosaic in the garden for the surface of the earth. The concrete base freezes quite vividly, therefore it is very proud to arrange the pebbles in accordance with the colors and prepare them for work in advance
For the sake of markup we will need pegs and a strong rope. The only peg we drive into the supposed center of the future composition. Using the rope tied to it and the 2nd peg as a compass, we draw a circle of a suitable radius. For about 12 cm deep, take out the earth from the formed circle. We make the bottom of the formed pit flat and perfectly tamp it. The more thoroughly the stages of work are carried out all the time, the better it will be to look at the result. Art is worth it in order to spend a little time for it
Of the thin strips of metal, who are allowed to bend, create an oval formwork, place it in accordance with the perimeter of the pit. Fall asleep inside the circle of rubble (5 cm), pour the substance of sand and cement (3 cm), place the reinforced mesh on top, on top of which we pour the remaining solution (3 cm).
Spread out the mosaic is allowed through a short space of time, if the moisture from the surface will evaporate a little and the solution will seize. So that the pebbles placed in the solution are perfectly deepened, we drive them into it with a mallet. Then complete the end of the work in accordance with the formation of the pattern, we seal all the joints with a special consistency, which is used in the work with the tile. The case is coming to an end. It is necessary that the stone is not only imprinted in the concrete, but its elements were perfectly sealed without interruption
Suffer a few days, so that the art all dried up. After that, you can rejoice your own creation completely.
A video compilation of other unusual thoughts