Future pots and their task
A distinctive feature of pots through an ordinary pot for the sake of plants is the absence in the day of the capacity of drainage holes, necessary for the drain of excess water. In addition to the decorative function, a correctly selected capacity is able to facilitate the upbringing of a greenish pupil. Since the essence of the decorative flowerpots for the sake of the garden is the decoration of the interior, the appearance of the containers is almost always decorated with a more beautiful and lovely
Depending on the material for the production of pots for the sake of the garden there are following types:
Plastic. The only one of the cheapest options of pots, the main advantage of which is a short authority and ease of care.
Woody. The natural base of containers allows you to protect rootlets of plants through hypothermia and drying, and also to help rational conditions for growth.
Iron. The current matter, characterized by durability, is terrific for the sake of street gardening.
Clay. Matter, having a rough or smooth appearance - is a universal base for painting and decorating with stucco. However, the gift of lowering water limits the scope of its implementation.
Claying. Natural matter treated with a special glaze is widely used to be like decorating interiors, for no reason and for garden design.
The main requirements that are imposed on pots for the sake of garden design are the gift of saving the form given by the master and the highest resistance to excessive land moisture and temperature changes. If we take from the base of the location of the improvised flower garden, then there are floor structures and garden pots for the sake of the garden
Unusual use of old things
Street pots are allowed to act from what they want. In the occupation can begin the old property, carefully stored"just in case", furnishings, dishes ... Unusual hinged pots allowed to perform from old teapots, which are quite located along the stairs, hanging for a wire
In the hands of the creative owner, a second existence can even be found in a decrepit road box without a handle, who, like in the saying, is hard to say and throw out a pity
A wooden box opened with stain and decorated in the form of a fairy-tale fairy tale, quite a worthy frame for the flower garden
Fill the box free, setting steadily into it pretty pots with plants. If the height of the tanks is much lower than the walls of the suitcase, you can pour pebbles and pebbles for the bottom of the pots, and fill the spaces with moss or crushed bark.
Options for self-produced flowerpots
For the production of unique containers that can organically fit into the landscape design and make it a beautiful decoration, it is permissible to extract real different materials: burlap and rope, part of polyethylene film and plastic bottles, gypsum and polymer clay ... Any of these materials in the experienced hands of the master is able to transform into a brilliant element of garden decor.
Decorative vase from gypsum
For the sake of producing an unusual pot, which will serve not only a year, must be prepared:
asbestos or polymer gypsum
flexible wire for framing;
build bandages or strips of cloth 10 cm wide
paints and shades for a water based base
acrylic lacquer for the sake of external work
Kashpo can own any form: all the time depends on the chosen base for the sake of the frame. In our case, plastic weather with a volume of 10 liters is enough to serve as a temporary base, which, according to the end of the work, is quite satisfied .
The weather is set for a flat appearance, turning upside down. For the sake of production of the frame, the form of the bucket is braided with wire, the edges of which are carefully tucked and hid. The resulting frame is removed from the bucket. Now it is permitted to begin to cultivate gypsum, a mixture of which in the finished form should suggest thick sour cream. In the container with gypsum substance we lower the fabric bands or bandages, soaking them for 2-3 minutes. Our task: to impose a wire frame according to external and internal walls. Strips of fabric, perfectly impregnated with the substance, discharge from the layer lay out for the skeleton before the time, while the thickness of the walls does not reach 1.5-2 cm. The remaining substance is painstakingly smeared the walls of the pots. The design is left before full drying for 12 hours. Then full solidification of the base is allowed to begin to decorate the flower pots, decorating it with various pebbles, colored glass and beads
For this, we first level the look by sandpapering it. Then we cover the bottom and the walls of the product with a white water-emulsion paint, on top of which the second layer is applied to the desired field for applique or decoration.
Truck hinged cover
The ancient auto frame is a brilliant material for the production of parts of the decor. Rubber is resistant to outdoor exposure and adverse weather conditions, therefore it can not last for a single season. It's hard to believe that such a bright parrot, proudly swinging around the canopy of the house or between branches of trees, is allowed to perform only because of a single day with their own hands
For the production of a hinged plant it will be necessary:
frame without metal cord
Drill and drill diameter 10;
A sharp knife;
M8 washers, bolts and nuts
paints for the sake of external work
In order to facilitate the work of cutting out details, the point of the knife can be wetted at times in a watery soap or detergent. Along the side wheel on both sides of the tire do symmetrical notches 2/3. In the larger side of the notched tire, through the triangular notches, we separate the side share
As a result, you should get a workpiece, which in the next accurately turns out in reverse, giving the desired shape
The parrot's torso ends: it remains to decorate the bird's head and give it a well-known outline. For the sake of this, we cut out the tires from the tires. Cut the mouth of the parrot into a longitudinal incision made with a sharp knife in accordance with the edge of the smallest side of the body.
In order to fix the mouth firmly, both halves are squeezed with a crochet, drilled through their through hole, through which then they are tightened with a bolt. Correct the shape of the bird is allowed already in accordance with the place, having executed fairly cuts with a knife. From the long side of the workpiece, according to a chalk marked in advance, we cut out the tail of an exotic bird
The parrot is drunk: it remains to pull the side parts of the product with a rope or wire, and then paint it in bright colors.
Floor pot of twigs
For the sake of the work, branches with a width of 0.7-1.5 cm and a narrow rope or twine will be required. If you can eat, the importance is better to give the branches of birch, viburnum and reeds - they look more curious. Wands are better to choose a similar thickness.
For the sake of producing pots, branches with a knife or a pruner cut into almost the same length, which should exist for 1-2 cm above the pot itself. Wand sticks lining the well-wishing to a friend for a smooth look and braid for no reason, so that a mat, the length of which should exist for the sake of wrapping around the pot, should come out. Thin branches of trees, which are left after the rest of the garden, can be removed as parts of the decor. They can serve as a basis for the production of a beautiful pot, which is perfect for a design like the site itself, for no reason and the interior of the house
For the sake of constructing bigger designs, it is better to extract reeds, or bars, in a circular or square section, collected in the form of a cube.
Comfort is a variation if the sprigs are glued to the base-burlap. A woven mat wraps the outer walls of the pot and fixes the decoration with the help of variegated satin ribbons or the same twine.
Walkthroughs for video
Комментариев нет:
Отправить комментарий