From the window frames it is permissible to make a kind of fleeting collapsible variation of a mini-greenhouse for the sake of growing seedlings, for no reason and a huge stationary structure. All the time depends on the crops that are planned to grow there, and the local climate. If the hellebore in summer is warm, and most of the plants perfectly survive in the open ground, in other words, the meaning is limited to several hotbeds, which will then be transplanted to the building before the next spring. However, in a cool climate it will be necessary to arrange a greenhouse"for centuries", so that neither the wind nor the sediment in winter can spoil it, and in the spring it does not wash away the floods.
Беспричинно через того, какую постройку теплицы вы выберете, оконные рамы надо приготовить к новейшей функции. Полный железный запас – шпингалеты, крючки, ручки и около. в теплице не пригодятся, следовательно их демонтируют.
Once the windows were in use, then the suit in them, naturally, turned out. All the layers of varnish and paints must be stolen, since the tree needs defense through moisture. The climate of the greenhouse is unfavorable for the sake of the tree species, and so that it does not rot from the year, the frame must be treated with an antiseptic.
It is good to paint over the top with a layer of white paint. The sun is quite less to heat the frame and to extinguish the term of its building. However, for the sake of the fellow, it is free to act.
Mini-greenhouse product for the sake of growing seedlings
While the frames dry, work on the construction itself. For the sake of the beginning it is allowed to practice the development of a mini-greenhouse, and later to undertake for a huge, non-separable.
Layout and preparation of the material
In greenhouses, window frames usually serve as a roof, which is fastened to a wooden base. For a day, the roof is slightly opened, allowing the seedlings to be ventilated. Therefore, estimate the size of the mini-greenhouse for no reason, so that its width coincides with the width of the frame. The length is calculated based on the number of windows with which the roof is laid out sufficiently. In most cases, there are 2-3 of them.
For the sake of the framework, boards and 4 beams will be useful. The bars are dug in accordance with the corners of the coming boy, and boards are knocked out of the boards. Because the greenhouse must have an inclined roof for the sake of rolling down the precipitation and the greatest passage of the sun's rays, the previous shield is knocked out of 3 boards, the last one out of 4, and 4 are used in the side panels, but the top board is cut off for an unreasonable length, elevation through the frontal shield to the rear. The prepared shields are fixed to the uneven bars with screws. For the sake of the fellow, the ground is usually not done, but if the land is marshy, it is permissible to solve the single-brick structure near the bottom.
Roof product from window frames
Because the greenhouse is simple in the assembly, the windows from the frames are usually not removed. Therefore, they proceed immediately to the installation.
Frames are laid across the length of the greenhouse and fixed to the back (the highest) wall of the frame. For this, window hinges are used.
The best way is to leave the windows mobile all the time, without securing between each other, and slightly docking. Here, for the sake of airing and leaving from seedlings, it is permissible to slightly open any part of the roof.
For the sake of reliability, each frame is fixed for the short side of the frame with the help of a door hook, and the handles are bolted from above, so that it is easier to lift the windows.
Fill the bar from the inside of the front panel, lowering it for 2-3 cm below the edge of the top board. It is rather a support for a stick or a bar that lifts the roof for airing.
The handles are fixed to the edge of each frame with screws so that it is easier to open one of the roof parts for the sake of airing the seedlings
Developing the installation of a stationary greenhouse
If the greenhouse does not have enough or climatic conditions to grow plants in the open ground, it is allowed to make a stronger structure that does not quite understand for the winter and will last 3-5 seasons. However, a stationary greenhouse of old window frames is the most pregnant of all variants of similar structures.Fundamental works: options and development of filling
The need for a foundation for a greenhouse is justified also by the fact that the height of the window frames does not exceed 1.5 meters. This is an awkward value for the sake of normal movement inside. Absolutely, if the height of the walls is 1.7-1.8 m, after all, they are looked after by plants in the main lady. Consequently, the missing cm should be"increased"with the help of a foundation. Another advantage is that the tree will be disposed of through direct contact with the ground, and probably less. The elevated part of the basement is calculated on the basis of the overall height of the structure, so that the frames together with the concrete make the walls, inside which it is allowed to alternate without bending, p>
The most profitable is the ribbon base made of concrete.
Carry out the site layout for no reason, so that the greenhouse stood from the north to the south (to be such a plant arrangement will be a full day near the sun's rays). Drive in the corners of the pegs, twine the string.
Dig a trench 15-20 cm wide, depth - before half a meter. If the height of freezing in your area is deeper, then drip in front of 70 cm. This will make the hothouse non-freezing and allow planting the plants very early, first of spring.
For the strengthening of the base, gravel and 10 cm of sand are covered.
Dust is poured by a layer of concrete, casting stones and pouring the rest of the ground in front of the ground with concrete.
For the next day put the formwork, in order to raise the ground above the ground. The height of the formwork depends on the fact that the total height of the greenhouse you want to receive. It is usually poured 15-25 cm.
Fill with concrete, compacting it with stones or reinforcement, and leave it before complete cooling. Some owners do without formwork, spreading the above-ground share of the foundation a beam of 15x15 cm. In order to get a 30 cm elevation, the bars are laid in pairs, a well-wisher for a friend. This kind of macro is useful 8 wood bars, which are lubricated with an antiseptic or used engine oil. Tie between the oboi staples, and the edges are fastened with metal corners.For the sake of a short greenhouse it is enough to dig a trench for 30 cm, to sleep it with gravel, and later sand and for it to lay logs at once. Byl, such a structure can freeze.
The development of the installation of the frame
Between the pouring of the foundation and the installation of the frame should recover more than 2 weeks, so that the concrete is completely solidified and acclimatized in the ground. Therefore, calculate the time frame for the construction of the greenhouse from the window frames in advance, in order to wait to mount it to plant the seedlings.
The frame consists of racks, as well as the upper and lower strapping. They can be performed in 2 ways: either from planks and beams, or from iron corners.
If you remove the iron corners, then the lower strapping is done for the step of pouring the aboveground part of the foundation, in order to connect the metal with the base. Side racks from among the same corners are welded or connected to the bottom by bolts. The top bandage should be calculated with a jeweler's precision in accordance with the height, so that the window frames do not appear to be higher or lower than the carcass strip.
If you extract a tree, then you need a log 10X10 cm, who put for the base, 8 boards for the binding (thickness - 4 cm), 4 side pillars of the bar (5x5 cm) and intermediate, the number of which is calculated based on the number of frames, which will install. For example, if the length of 4 frames is enough, and according to the width of 2, then 3 racks for one side, 3 for the other, and one for the side are useful. From the second end, a door is to be put, which we will assume later.
The iron bars and screws are used for the assembly of the frame. The bars are joined with metal corners, pre-drilling the holes near the bolt, and all the iron parts are processed anticorrosive composition
Work progress:
We attach the log 10 to the foundation with anchor bolts.
We put the side racks, controlling the vertical level.
We beat the bottom plank, using a half-nosed cutting and nailing. It is also possible to fasten the furniture corners, taken for the screw.
Install in the frame the intermediate posts with a step equal to the width of the 1st window.
. The side racks of the bar wish to be mounted using the building level and covered with a disinfectant for the best preservation of the tree
The skeleton for the sake of a gable roof is better to reduce for the ground, and then set for the construction. He is also knocked out of a bar. For the sake of the central risers, the tree is thicker, and the rafters, the top and the intermediate trunnion legs are allowed to be made from a bar of 5x5 cm. The roof frame is easier to type for the earth, because it is much easier to eat the protection and screw the screws into the top and rafters
Why is it better to catch a roof?
The roof is usually covered with a film or polycarbonate to build greenhouses from window frames . Window frames are used less often, since the authority of the design is extremely large, and it is difficult to determine the glass in an inclined position. In addition, the film or plastic for the winter can be removed. No one dismantles the windows, and in the winter they will recruit snow caps for themselves, shortening the building of the greenhouse. Intermediate rafter legs can be made not from a bar, but from a narrow thick board. Their protrusion is usually equal to the width of the window frames
It is better to stretch the film two, from different sides. It is unreasonably easier to check the height of the tension. Fix cephalic to the skeleton of the roof using wooden planks and small nails. If the pediments of the roof do not enclose with a film, but with a breathing material, like a building net, then it is permissible to remove window frames without a window leaf.
Fixing Frames in the Frame
Then , like they made a skeleton and a roof, they start installing window frames.
They are fixed with screws from the outside of the frame.
The gap between the windows is filled with mounting foam, and the top is closed with thin slats for the sake of full density.
Insert the glass, fixing not only the beads, but also lubricating the edges with a sealant, in order to exclude airflow.
And observe whether the windows were not squinting.
Hooks the hooks that will hold the pallets closed, and think through the fixing elements so that they do not hang loose in the open.
Each pane should be equipped not only with a crochet, but rather holding it in a closed condition, and think, so that it does not hang loose
Door installation
The final step is to install the doors in the front part of the greenhouse. If the structure is narrow, then this whole end is not advised to sew up the frames, since they are not simple to fit. It's easier just to leave the place between the door frame and the frame with a film.
A doorframe is made from a bar. For the sake of hanging the door leaf, it is allowed to remove the accessories removed from the windows. It remains to sleep the floor of the greenhouse with grassy soil, to defeat the beds - and it is allowed to begin planting plants.
Комментариев нет:
Отправить комментарий