Solving make a job, swaying in what like to return the strength of the labor day, each of us is not superfluous enough light fairly basic rules:
Matter of production. Before, like performing a hammock, you must comprehend the variation of its performance and choose a fabric. For the sake of creating a long-lasting product, the desire to choose camouflage, canvas, canvas cloth, coarse calico or mattress teak. Synthetic materials, despite the fact that they are lighter and stronger, do not want to be extracted for the sake of sewing products, since they do not allow the body to be seen. Reliability of fastening the supports. The arrangement of the hammock is permissible, pillars or pillars, for no reason and interspersed with two neighboring trees in the garden. If for the arrangement of the hammock, the supports are deliberately installed, then they must be sloughed more than for a meter. Between the garden trees, election should be thwarted for such, Hanging up. The hanging of the hammock above the ground is 1.5-1.6 meters. Intermediate between supports is calculated without cause: to the length of the article is added 30 cm, on average it is 2.75-3 meters. Due to the lack of ability to change the gap between supports, the length of the hammock is allowed to diversify through changes the height of the jaw, the creation of a stronger deflection or tension configuration.
Mobile construction is comfortable enough to lay off according to the site and place it in any corner of the garden, replacing those scenery. For the sake of that, in order to be able to arrange a place for rest, do not bully up to the location of trees in the garden or existing supporting structures, it is permissible to make such a framework around every hammock.
In order to better and more clearly punish like to perform a hammock with your own hands, we offer to see quite a few options for the design of this product. This will allow you to perform a real successful election, who will rather meet your preferences and abilities. There is a surplus of options, below are some of them.
Вариация 1 — мексиканский «кокон» из ткани
Such a hammock, resembling a cocoon outside, is one of the most common in manufacturing and quite comfortable in operation. Despite the simplicity of the design of the product, The hammock allows for an excellent relax without the need for muscle
It is not possible to fall out of the cocoon. And in order to get out of it or change the location of the body, you also need to make some effort. When folded, the work takes quite a bit of space and weighs less than 1 kg, so it is convenient to take it with you for nature or camping.
This variation of the hammock is quite simple in making. In order to sew a Mexican hammock, it is necessary to make two cuts of dense cloth in the size of 1.5-3 meters and a rope with a length of 20 m, who can withstand the authority of 150-200 kg, for the sake of tightening and suspending the product. A pair of fabric cuts are stacked together. A form for the sake of sewing a standard single-seated Mexican hammock
The cuts are traced from the two sides along the length of the pattern against each other. The length of the lower seam is 2 meters (for the figure is indicated in greenish color). Eventually, a tunnel with incomplete edges appears. Patterns marked with a yellowish line for the drawing are not stitched. This will allow the inner layer of the product to be laid with a water repellent film or a sintepon soft mat, which will greatly enhance the comfort of rest. The narrow side of the product, indicated by a reddish color, should be tucked in for 2-3 cm and stitched. Work is the end. It remains only to live in the rope formed. The stretched rope must be crossed and tightened for the ends, attaching the fabric. The stretch room is wrapped several times with the same cord and knotted
In order to attach a structure to a tree without damaging its bark, it is necessary for the rope to hang a tube for the sake of suspension or to slip a cloth around it. For the rest of small children and pensioners, it is allowed to improve the work by attaching a narrow side of a rectangular cut made according to the same pattern, to woody sticks
Variation 2 - woven hammock in macrame technique
Famous for most of our fellow citizens hammocks of Russian times outside resemble a volleyball net.
For the sake of that, in order to tie a fit and beautiful hammock, you must learn to weave pretty well knots of technique macrame. For the sake of work you will need a strong twine or a clothesline d=8mm, as well as two wood racks of similar size, about 1.5 meters long. For the anchoring of the rope in the bars, holes of d=20 mm are drilled for an equidistant distance of 4-5 cm. The ratio of the diameter of the hole to the diameter of the rope must be 1/3, which will allow the rope to fold more tightly.
The length of the cord depends on the pattern chosen. Retribution is spent without cause: the gap through the slats in front of the slats should be increased threefold, and then again multiplied for the number of holes. For no reason, in order to weave an openwork hammock with your own hands measuring 2.5 x 0.9 m, you will need 150 meters of cord for decoration and 20 meters for fixing the article to the support. Having learned to start such a small bundle, it is allowed to make a sufficiently attractive openwork work, decoration which does not lose its shape in the process of using.
The development of weaving from hammock cords is quite ordinary. A separate bundle is tied from 4 ropes, the size of the cells is less than 7 cm. The finished mesh is drawn through the holes for the slats and connected to the knots. Strength of the design is allowed to give with the help of iron rings
Комментариев нет:
Отправить комментарий